Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE, NOT REC (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width), 7 Leads |
Number of Pins |
7 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
1998 |
Series |
Soft-Skip™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Frequency |
65kHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NCP1271 |
Pin Count |
7 |
Number of Outputs |
1 |
Output Voltage |
20V |
Input Voltage-Nom |
14V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Operating Supply Current |
100mA |
Power Dissipation |
100mW |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
10V~20V |
Max Supply Current |
3.5mA |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Halogen Free |
Halogen Free |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
30ns |
Fall Time (Typ) |
20 ns |
Nominal Input Voltage |
14V |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
No |
Fault Protection |
Current Limiting, Over Load, Over Voltage, Short Circuit |
Max Duty Cycle |
86 % |
Input Current |
100mA |
Duty Cycle |
80% |
Output Isolation |
Isolated |
Voltage - Start Up |
12.6V |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NCP1271D65R2G Overview
The ac to dc converter is embedded in 8-SOIC (0.154, 3.90mm Width), 7 Leads package.The AC/DC power converter Tape & Reel (TR) is available for this product.The AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~125°C TJ degrees Celsius.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.A range of 10V~20V supply voltages (Vcc/Vdd) can be used.There have been 7 terminations of this program.On this ac/dc converter, there are 7 pins.In this ac-dc converter, there are 7 pins.Surface Mount are the recommended mounting method for the ac dc converters.This AC to DC converter belongs to the Soft-Skip? manufacturer family.If you select the NCP1271 family, you will be able to search similar acdc converters.A total of 1 outputs are to be processed.Switching Regulator or Controllers contains the ac to dc conversions.500mA is set as the output current.There is 20V output voltage from this AC/DC converter.This power AC DC is capable of reaching high efficiency when operating at a frequency of 65kHz .REACH SVHC standard can be found at No SVHC .Supply currents up to 3.5mA can be handled by this power AC DC.
NCP1271D65R2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
With 7 pins
Output Current at 500mA
NCP1271D65R2G Applications
There are a lot of ON Semiconductor NCP1271D65R2G AC DC Converters applications.
- Standby power supplies for VCR
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Linear Adapter Replacements
- IoT Applications
- Cellular phone chargers
- Appliances
- Off--line Battery Charger
- Power Adaptors
- AC--DC Adapter
- Power tools