NCP1351BDR2G
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 65kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1351 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | 8.9V~28V |
| Max Supply Current | 20mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 90ns |
| Fall Time (Typ) | 100 ns |
| Nominal Input Voltage | 12V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Over Power, Short Circuit |
| Max Duty Cycle | 50 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 18V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
NCP1351BDR2G Overview
A ac to dc converter of the package 8-SOIC (0.154, 3.90mm Width) contains the ac to dc converter.In Tape & Reel (TR) AC/DC power converter, it is available.There is a mounting point for this AC/DC converter in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -25°C~125°C TJ degrees Celsius.This AC DC converter employs SWITCHING CONTROLLER analog IC type.The voltage range of the supply can be set to 8.9V~28V (Vcc/Vdd).There are a total of 8 terminations.It contains 8 pins.Up to 8 pins are present on the ac-dc converter.The ac dc converters is suitable for mounting by Surface Mount .Similar acdc converters can be found using the NCP1351 family.A total of 1 outputs are to be processed.There are a ac to dc conversions included in Switching Regulator or Controllers .It has been set to 400mA for the output current.In this AC to DC transformer, the output voltage is 20V .A high efficiency is achieved when operating at a frequency of 65kHz .Approximately 20mA amps of supply current can be handled by the power AC DC.
NCP1351BDR2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 400mA
NCP1351BDR2G Applications
There are a lot of ON Semiconductor NCP1351BDR2G AC DC Converters applications.
- Automotive Telematics
- Battery chargers for mobile devices with touchpad display
- AC/DC Adaptors/Chargers for Cordless Phone
- Auxiliary Power Supply
- Standby power supplies for VCR
- Smartphones
- Standby power
- Off--line Battery Charger
- Power adapters for monitors
- AC/DC Adaptors/Chargers for PDAs
