NCP1351CDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1351 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | 8.9V~28V |
| Max Supply Current | 20mA |
| Input Voltage (Min) | 9.5V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 90ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 65kHz |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Over Power, Short Circuit |
| Output Isolation | Isolated |
| Voltage - Start Up | 18V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1351CDR2G Overview
8-SOIC (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.The AC/DC power converter is available in Tape & Reel (TR) .Surface Mount mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -25°C~125°C TJ °C in order to achieve its full performance.This AC DC converter employs SWITCHING CONTROLLER analog IC type.The voltage range of the supply can be set to 8.9V~28V (Vcc/Vdd).There are a total of 8 terminations.It contains 8 pins.There are 8 pins in total.It are possible to mount thare ac dc converters by Surface Mount .It is possible to search for similar acdc converters by using the NCP1351 family.A total of 1 outputs need to be run.Switching Regulator or Controllers contains the ac to dc conversions.We have set the output current to 400mA .It produces a voltage of 20V .There is a maximum current limAC to DC converter of 20mA for the supply.
NCP1351CDR2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 400mA
NCP1351CDR2G Applications
There are a lot of ON Semiconductor NCP1351CDR2G AC DC Converters applications.
- Chargers for cell/cordless phones
- USB-PD 2.0
- Standby power supplies for VCR
- Cellular phone chargers
- Networking
- Small off-line low voltage power supplies
- AC--DC Adapter
- Appliances
- PDAs
- Portable audio
