NCP1351CPG
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 21 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1351 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | 8.9V~28V |
| Max Supply Current | 20mA |
| Input Voltage (Min) | 9.5V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 90ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 65kHz |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Over Power, Short Circuit |
| Max Duty Cycle | 50 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 18V |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1351CPG Overview
In the package 8-DIP (0.300, 7.62mm) , the ac to dc converter is embedded.The AC/DC power converter type is Tube .Through Hole is mounted in the way of this AC/DC converter.The ac dc converter needs to be operated at -25°C~125°C TJ °C in order to perform.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.This AC/DC converter is designed for use within the range of 8.9V~28V supply voltage (Vcc/Vdd).In total, it has 8 terminations.On this ac/dc converter, there are 8 pins.There are a total of 8 pins on the ac-dc converter.It is suitable for mounting by Through Hole .You can search similar acdc converters based on NCP1351 family.The number of outputs to run is 1 .Switching Regulator or Controllers contains the ac to dc conversions.In this AC to DC transformer, the output current is set to 400mA .In this AC to DC transformer, the output voltage is 20V .AC to DC converter can handle a maximum supply current of 20mA .
NCP1351CPG Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 400mA
NCP1351CPG Applications
There are a lot of ON Semiconductor NCP1351CPG AC DC Converters applications.
- White goods
- Set Top Boxes (STB)
- Battery chargers for media tablets
- Adapter for ADSL
- Automotive Telematics
- AC/DC Adaptors/Chargers for Cell Phones
- Adapters
- Wall switches
- Networking
- WiFi Wireless
