NCP1377BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ALSO HAS RESONANT CONTROL TECHNIQUE |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1377 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.5V~18V |
| Max Supply Current | 5mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 300kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1377BDR2G Overview
There is a ac to dc converter embedded in package 8-SOIC (0.154, 3.90mm Width) .The AC/DC power converter type is Tape & Reel (TR) .It is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~125°C TJ degrees Celsius.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.As soon as the switching frequency reaches Up to 300kHz , the circuit is closed.Vcc/Vdd can be used within the range of 7.5V~18V supply voltage.A total of 8 terminations have been recorded.There are 8 pins on this ac/dc converter.The ac-dc converter has 8 pins.Surface Mount are the recommended mounting method for the ac dc converters.It is possible to search for similar acdc converters by using the NCP1377 family.A total of 1 outputs are to be processed.AC to DC converter is included in Switching Regulator or Controllers .The output current is set to 500mA .In this AC to DC transformer, the output voltage is 18V .The power AC DC is capable of high efficiency when operated at a frequency of 300kHz .You can read the standard of REACH SVHC : No SVHC .Using this ACDC converter, ALSO HAS RESONANT CONTROL TECHNIQUE is also accessible.A maximum supply current of 5mA can be handled by this power AC DC.
NCP1377BDR2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 300kHz
With 8 pins
Output Current at 500mA
NCP1377BDR2G Applications
There are a lot of ON Semiconductor NCP1377BDR2G AC DC Converters applications.
- Home appliances
- USB type-c v1.2 chargers with optional VDM
- Standby Power for General Off-Line Applications
- Battery chargers for cordless
- Dimmers
- Auxiliary Power Supplies
- Power adapters for monitors
- AC/DC Adaptors/Chargers for Cell Phones
- Power tools
- Standby power supplies for VCR
