NCP1377DR2G
| Parameters | |
|---|---|
| Voltage - Start Up | 12.5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ALSO HAS RESONANT CONTROL TECHNIQUE |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1377 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.5V~18V |
| Max Supply Current | 5mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 100kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Output Isolation | Isolated |
NCP1377DR2G Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width) .Tape & Reel (TR) case is available for the ac dc converter.In this case, the AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~125°C TJ °C.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.There is Up to 100kHz switching frequency.A range of 7.5V~18V supply voltages (Vcc/Vdd) can be used.Total terminations are 8 .The ac/dc converter has a total of 8 pins.There are 8 pins in the ac-dc converter.Surface Mount are the recommended mounting method for the ac dc converters.Search similar acdc converters based on NCP1377 family members.A total of 1 outputs need to be run.Switching Regulator or Controllers includes the ac to dc conversions.The output current is set to 500mA .The output voltage of the AC/DC converter is 18V .A high efficiency is achieved when operating at a frequency of 100kHz .It is also possible to determine ALSO HAS RESONANT CONTROL TECHNIQUE using this ACDC converter.AC to DC converter can handle a maximum supply current of 5mA .
NCP1377DR2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 100kHz
With 8 pins
Output Current at 500mA
NCP1377DR2G Applications
There are a lot of ON Semiconductor NCP1377DR2G AC DC Converters applications.
- Standby power supplies for VCR
- Appliance Power Supplies
- Switching AC-DC Charger
- Humidifier
- Automotive Clusters
- Dimmers
- Off--line Battery Charger
- ZigBee
- Universal Off-Line Power Supplies
- Adaptors for DSCs
