NCP1378P
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| JESD-30 Code | R-PDIP-T7 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8.4V~18V |
| Control Features | Current Limit |
| Input Voltage (Min) | 6V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.5A |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
NCP1378P Overview
It comes in a 8-DIP (0.300, 7.62mm), 7 Leads package, so switching controller can be used for most applications. 1 outputs can be generated with the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 8.4V~18V volts and has 8.4V~18V supply voltage. Work well in dc switchers with a 0°C~125°C TJ. It is suitable for general dc dc regulator when it is set to Through Hole. The dcdc regulator features Current Limit for efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. A switching converters's terminal (s) sits at the DUAL position. Various 7 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 11V. 6V should be the minimum input voltage for the dc dc voltage regulator. 0.5A is the greatest value switching converter outputs as current.
NCP1378P Features
Transistor Driver Outputs
Current Limit
PULSE WIDTH MODULATION
NCP1378P Applications
There are a lot of Rochester Electronics, LLC NCP1378P DC to DC converter applications.
- Nuclear power plants
- Injection molding machinery
- Milling machines
- Direct power supply system
- Laboratories
- Window air conditioners
- Smoke exhaust equipment
- Drilling machines
- Electrical distribution systems
- PSRR circuits
