NCP1378P
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Base Part Number | NCP1378 |
| JESD-30 Code | R-PDIP-T7 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 16V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 8.4V~18V |
| Control Features | Current Limit |
| Input Voltage (Min) | 6V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Switching Frequency | 100kHz |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1378P Overview
It comes in a 8-DIP (0.300, 7.62mm), 7 Leads package, so switching controller can be used for most applications. 1 outputs can be generated with the dc motor controller. There is a Tube solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 8.4V~18V. Qualified to work in a 0°C~125°C TJ dc switcher. Through Hole makes it suitable for general dc dc regulator. To provide efficient switching control, Current Limit is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 7 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 11V. You can find other relevant dc to dc converter ics by searching "NCP1378". Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 6V. Test statistics indicate DC regulator outputs 16V voltage. In most cases, the dc dc regulator's output current is 500mA. This information should be noted when you begin working with the component. A frequency of 100kHz is used by the switching controller. The frequency at which this controller generally works well is 100kHz.
NCP1378P Features
Transistor Driver Outputs
Current Limit
PULSE WIDTH MODULATION
Frequency: 100kHz
Switching Frequency: 100kHz
NCP1378P Applications
There are a lot of ON Semiconductor NCP1378P DC to DC converter applications.
- Servo drive system
- Grinders
- Machining centers
- Wind power
- Telecommunications equipment
- Radio equipment
- Program control systems
- Analog precision reference circuits
- Elevator lighting
- Textile machinery
