NCP1378PG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Base Part Number | NCP1378 |
| JESD-30 Code | R-PDIP-T7 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 16V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 8.4V~18V |
| Control Features | Current Limit |
| Input Voltage (Min) | 8.2V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Switching Frequency | 100kHz |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1378PG Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the switching controller meets most application requirements. 1 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. It is capable of handling Transistor Driver dc switching's outputs (s). A 8.4V~18V voltage is supplied to the dc control and used for operating it. Suitable for work in a 0°C~125°C TJ dc switcher. The Through Hole allows it to be used for dc dc regulator in general. The dcdc regulator features Current Limit for efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 7 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 11V. Search for "NCP1378" to find other relevant dc to dc converter ics. In particular, switching converter belongs to the Switching Regulator or Controllers family. An input voltage of 8.2V is the minimum required for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 16V. It's important to remember that the dc dc regulator's normaloutput current is 500mA, so you should note it down when starting a new project. Switching controllers operate at 100kHz frequencies. 100kHz is the frequency at which this controller performs well most of the time.
NCP1378PG Features
Transistor Driver Outputs
Current Limit
PULSE WIDTH MODULATION
Frequency: 100kHz
Switching Frequency: 100kHz
NCP1378PG Applications
There are a lot of ON Semiconductor NCP1378PG DC to DC converter applications.
- Scientific research
- seismic instrument power circuits
- Medical equipment
- Hydraulic presses
- Automation technology
- Current source circuits
- Window air conditioners
- Flexible manufacturing cells
- Laboratories
- Machining centers
