NCP1380BDR2G
| Parameters | |
|---|---|
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 10μA |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 9V~28V |
| Input Voltage (Min) | 9.4V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 25 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 65kHz |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Isolation | Non-Isolated |
| Output Isolation | Isolated |
| Voltage - Start Up | 17V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | NCP1380 |
NCP1380BDR2G Overview
It is embedded in package 8-SOIC (0.154, 3.90mm Width) .It is available in Tape & Reel (TR) AC/DC power converter.Surface Mount mounts this AC/DC converter.It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.This AC DC converter employs SWITCHING CONTROLLER analog IC type.Vcc/Vdd can be used within the range of 9V~28V supply voltage.In total, it has 8 terminations.Approximately 8 pins are present on the ac/dc converter.A total of 8 pins are present on the ac-dc converter.Surface Mount is a suitable mounting point for the ac dc converters.It is possible to search for similar acdc converters by using the NCP1380 family.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions are contained in Switching Regulator or Controllers .Current output is set to 800mA .Its output voltage amounts to 20V .You can read the standard of REACH SVHC : No SVHC .Its max frequency is 65kHz .
NCP1380BDR2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 800mA
NCP1380BDR2G Applications
There are a lot of ON Semiconductor NCP1380BDR2G AC DC Converters applications.
- Records
- Adapters for Handheld Electronics
- Vacuum Cleaner
- Universal input AC/DC adapters (15W - 45W)
- AC/DC Adaptors/Chargers for Cell Phones
- AC/DC Adaptors/Chargers for Cordless Phone
- Auxiliary Power Supplies
- Handheld/Battery-Powered Systems
- Standby power supplies for TV
- AC?DC USB chargers for Cameras
