NCP1380CDR2G
| Parameters | |
|---|---|
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 25 ns |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 65kHz |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Output Isolation | Isolated |
| Voltage - Start Up | 17V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | NCP1380 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 30mA |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 9V~28V |
| Input Voltage (Min) | 9.4V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
NCP1380CDR2G Overview
8-SOIC (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.The ac dc converter is available in Tape & Reel (TR) case.As you can see, this AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.It can be used within the range of 9V~28V supply voltage (Vcc/Vdd).As a result, it has had 8 terminations.There are 8 pins on the ac/dc converter.There are 8 pins in the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .Search similar acdc converters based on NCP1380 family members.A total of 1 outputs need to be run.The ac to dc conversions are contained in Switching Regulator or Controllers .It has been set to 800mA for the output current.There is 20V voltage output from it.
NCP1380CDR2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 800mA
NCP1380CDR2G Applications
There are a lot of ON Semiconductor NCP1380CDR2G AC DC Converters applications.
- Portable Apparatus
- Adapter/Charger for Cordless Phones
- Wireless System
- Consumer electronics
- ZigBee
- Home Appliance Applications
- Low-Voltage I/O System Power
- AC?DC USB chargers for Cameras
- AC-DC Output Power Conversion Applications
- Standby Power Supplies
