NCP1395ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 15 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1395 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.3mA |
| Voltage - Supply (Vcc/Vdd) | 9.3V~20V |
| Control Features | Frequency Control, Soft Start |
| Topology | Half-Bridge |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Halogen Free | Halogen Free |
| Control Technique | RESONANT CONTROL |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 11V |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Fault Protection | Over Temperature, Over Voltage |
| Max Duty Cycle | 52 % |
| Duty Cycle | 50% |
| Output Isolation | Isolated |
| Voltage - Start Up | 13.3V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1395ADR2G Overview
In the 16-SOIC (0.154, 3.90mm Width) package, the ac to dc converter is embedded.You can get it in AC/DC power converter Tape & Reel (TR) .The AC/DC converter is mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.As soon as the switching frequency reaches 50kHz~1MHz , the circuit is closed.This AC/DC converter is suitable for operation in the range of 9.3V~20V supply voltage (Vcc/Vdd).There are a total of 16 terminations.There are 16 pins on this ac/dc converter.The ac-dc converter has 16 pins.Surface Mount are the recommended mounting method for the ac dc converters.It is possible to search for similar acdc converters by using the NCP1395 family.There are 2 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .As a result, its output voltage is 10V .As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.REACH SVHC standard can be found at No SVHC .
NCP1395ADR2G Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 50kHz~1MHz
With 16 pins
NCP1395ADR2G Applications
There are a lot of ON Semiconductor NCP1395ADR2G AC DC Converters applications.
- AC/DC Adaptors/Chargers for E-books
- Tablets
- Records
- Industrial controls
- Small off-line low voltage power supplies
- LED Driver
- Rice Cooker
- USB type-c v1.2 chargers with optional VDM
- Digital cameras
- Automotive Telematics
