NCP1395APG

16 Terminations9.3V~20V AC to DC power converter50kHz~1MHz

Manufacturer: Rochester Electronics, LLC
Nocochips NO: 699-NCP1395APG
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 112
Description: 16 Terminations9.3V~20V AC to DC power converter50kHz~1MHz (Kg)

Details

Tags

Parameters
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Terminal Finish	MATTE TIN
Terminal Position	DUAL
Number of Functions	1
Terminal Pitch	2.54mm
Pin Count	8
JESD-30 Code	R-PDIP-T16
Qualification Status	COMMERCIAL
Input Voltage-Nom	11V
Analog IC - Other Type	SWITCHING CONTROLLER
Voltage - Supply (Vcc/Vdd)	9.3V~20V
Control Features	Frequency Control, Soft Start
Input Voltage (Min)	8.3V
Topology	Half-Bridge
Control Mode	CURRENT-MODE
Frequency - Switching	50kHz~1MHz
Input Voltage (Max)	20V
Control Technique	RESONANT CONTROL
Switcher Configuration	PUSH-PULL
Internal Switch(s)	No
Fault Protection	Over Temperature, Over Voltage
Duty Cycle	50%
Output Isolation	Isolated
Voltage - Start Up	13.3V
Height Seated (Max)	4.44mm
Length	19.175mm
Width	7.62mm
RoHS Status	ROHS3 Compliant

NCP1395APG Overview

In the package 16-DIP (0.300, 7.62mm) , the ac to dc converter is embedded.Tube case is available for the ac dc converter.As you can see, this AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.At this point, the switching frequency reaches 50kHz~1MHz .This AC/DC converter is designed for use within the range of 9.3V~20V supply voltage (Vcc/Vdd).As a result, it has a total of 16 terminations.There are a total of 8 pins on the ac-dc converter.Based on a unique technique, it is possible to ensure input voltages with the maximal value of 20V .