NCP1395BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 12 hours ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1395 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.3mA |
| Voltage - Supply (Vcc/Vdd) | 9.3V~20V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 8.3V |
| Topology | Half-Bridge |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Halogen Free | Halogen Free |
| Control Technique | RESONANT CONTROL |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1.11MHz |
| Internal Switch(s) | No |
| Fault Protection | Over Temperature, Over Voltage |
| Max Duty Cycle | 52 % |
| Duty Cycle | 50% |
| Output Isolation | Isolated |
| Voltage - Start Up | 13.3V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1395BDR2G Overview
This ac to dc converter is included in the package 16-SOIC (0.154, 3.90mm Width) .The AC/DC power converter is available in Tape & Reel (TR) .There is a mounting point for this AC/DC converter in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.As a result, the switching frequency reaches 50kHz~1MHz .Within the range of 9.3V~20V supply voltage (Vcc/Vdd), it can be used.A total of 16 terminations have been recorded.The ac/dc converter has a total of 16 pins.The ac-dc converter has 16 pins.There are no problem mounting the ac dc converters by Surface Mount .Similar acdc converters can be found using the NCP1395 family.A total of 2 outputs need to be run.The ac to dc conversions are included in Switching Regulator or Controllers .There is 10V output voltage from this AC/DC converter.During a 20V -voltage supply, the interface IC conducts.1.11MHz is its maximum frequency.
NCP1395BDR2G Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 50kHz~1MHz
With 16 pins
Operating Supply Voltage at the range of 20V
NCP1395BDR2G Applications
There are a lot of ON Semiconductor NCP1395BDR2G AC DC Converters applications.
- WiFi Wireless
- Vacuum Cleaner
- AC-DC Output Power Conversion Applications
- SMPS house keeping power supplies
- AC/DC Adaptors/Chargers for Cell Phones
- Remotely-controlled appliances
- Standby Power for General Off-Line Applications
- Air Conditioning
- Cellular phone chargers
- Power tools
