NCP1396ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width), 15 Leads |
| Number of Pins | 15 |
| Weight | 665.986997mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 15 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1396 |
| Pin Count | 15 |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 300μA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Max Supply Current | 350μA |
| Control Features | Frequency Control, Soft Start |
| Topology | Half-Bridge |
| Frequency - Switching | 50kHz~500kHz |
| Halogen Free | Halogen Free |
| Control Technique | RESONANT CONTROL |
| Rise Time | 40ns |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 12V |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Fault Protection | Over Temperature |
| Max Duty Cycle | 52 % |
| Duty Cycle | 50% |
| Output Isolation | Isolated |
| Voltage - Start Up | 13.4V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1396ADR2G Overview
In the package 16-SOIC (0.154, 3.90mm Width), 15 Leads , the ac to dc converter is embedded.There is a AC/DC power converter of Tape & Reel (TR) available.There is a AC/DC converter mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.There is 50kHz~500kHz switching frequency.It can be used within the range of 9.5V~20V supply voltage (Vcc/Vdd).There are a total of 15 terminations in it.In this ac/dc converter, there are 15 pins.There are 15 pins in the ac-dc converter.It is suitable for mounting by Surface Mount .If you select the NCP1396 family, you will be able to search for similar acdc converters.A total of 1 outputs are available for processing.The ac to dc conversions are included in Switching Regulator or Controllers .The output current is set to 300μA .Its output voltage is20V .The power AC DC is capable of high efficiency when operated at a frequency of 500kHz .You may read the REACH SVHC standard at No SVHC .AC to DC converter can handle a maximum supply current of 350μA .
NCP1396ADR2G Features
Packaged with 16-SOIC (0.154, 3.90mm Width), 15 Leads
Switching Frequency at 50kHz~500kHz
With 15 pins
Output Current at 300μA
NCP1396ADR2G Applications
There are a lot of ON Semiconductor NCP1396ADR2G AC DC Converters applications.
- Switching AC-DC Adapter
- Power Adaptors
- Adaptors for Portable Media Player
- Open Frame Switching Power Supply
- Appliances
- Utility meters
- Humidifier
- Z-Wave
- AC-DC Output Power Conversion Applications
- Power Adaptors
