NCP1396BDR2G
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1396 |
| Pin Count | 15 |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 300μA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Control Features | Frequency Control, Soft Start |
| Topology | Half-Bridge |
| Frequency - Switching | 50kHz~500kHz |
| Halogen Free | Halogen Free |
| Control Technique | RESONANT CONTROL |
| Rise Time | 40ns |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 12V |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Fault Protection | Over Temperature |
| Max Duty Cycle | 52 % |
| Duty Cycle | 50% |
| Output Isolation | Isolated |
| Voltage - Start Up | 10.5V |
| Length | 9.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width), 15 Leads |
| Number of Pins | 15 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 15 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
NCP1396BDR2G Overview
A ac to dc converter of the package 16-SOIC (0.154, 3.90mm Width), 15 Leads contains the ac to dc converter.Tape & Reel (TR) case is available for the ac dc converter.This AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.This AC DC converter employs SWITCHING CONTROLLER analog IC type.There is 50kHz~500kHz switching frequency.This AC/DC converter is suitable for operation in the range of 9.5V~20V supply voltage (Vcc/Vdd).There are a total of 15 terminations in it.Approximately 15 pins are present on the ac/dc converter.There are a total of 15 pins on the ac-dc converter.It is suitable for mounting by Surface Mount .Based on the NCP1396 family, you can search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.AC to DC converter is included in Switching Regulator or Controllers .It has been set to 300μA for the output current.There is 20V voltage output from it.When operating at a frequency of 500kHz , AC to DC converter is capable of reaching high efficiency.Here is the standard for REACH SVHC : No SVHC .
NCP1396BDR2G Features
Packaged with 16-SOIC (0.154, 3.90mm Width), 15 Leads
Switching Frequency at 50kHz~500kHz
With 15 pins
Output Current at 300μA
NCP1396BDR2G Applications
There are a lot of ON Semiconductor NCP1396BDR2G AC DC Converters applications.
- Linear Adapter Replacements
- Power tools
- Power adapters for network devices
- Cellular phone chargers
- Remotely-controlled appliances
- Lighting controls
- WiFi Wireless
- Standby power supplies for VCR
- Off--line Battery Charger
- AC?DC USB chargers for Tablets
