NCP1397BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width), 15 Leads |
| Number of Pins | 15 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | NCP1397 |
| Pin Count | 15 |
| Number of Outputs | 1 |
| Output Voltage | 300mV |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4mA |
| Output Current | 4mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Control Features | Frequency Control |
| Topology | Half-Bridge |
| Frequency - Switching | 60kHz~500kHz |
| Halogen Free | Halogen Free |
| Control Technique | RESONANT CONTROL |
| Rise Time | 40ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 560kHz |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 52 % |
| Isolation | Non-Isolated |
| Duty Cycle | 50% |
| Output Isolation | Isolated |
| Voltage - Start Up | 10.5V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1397BDR2G Overview
It is embedded in package 16-SOIC (0.154, 3.90mm Width), 15 Leads .The AC/DC power converter Tape & Reel (TR) is available for this product.It is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~125°C TJ °C so that it can deliver its performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.The switching frequency reaches 60kHz~500kHz .Within the range of 9.5V~20V supply voltage (Vcc/Vdd), it can be used.As a result, it has a total of 16 terminations.There are 15 pins on this ac/dc converter.There are a total of 15 pins on the ac-dc converter.Surface Mount is the recommended mounting method for the ac dc converters.A similar acdc converter can be searched by using the NCP1397 family.Running 1 outputs is available.AC to DC converter is contained in Switching Regulator or Controllers .The output current is set to 4mA .It produces a voltage of 300mV .When the supply voltage is 20V , the interface IC conducts.560kHz is the maximum frequency.
NCP1397BDR2G Features
Packaged with 16-SOIC (0.154, 3.90mm Width), 15 Leads
Switching Frequency at 60kHz~500kHz
With 15 pins
Output Current at 4mA
Operating Supply Voltage at the range of 20V
NCP1397BDR2G Applications
There are a lot of ON Semiconductor NCP1397BDR2G AC DC Converters applications.
- Adapters for Handheld Electronics
- Consumer electronics
- Auxiliary Power Supply
- SMPS house keeping power supplies
- Adaptors for DSCs
- 3.3V power supplies
- ATX/BTX Auxiliary Power
- Networking
- Power Adaptors
- Standby power
