NCP1421DMR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1421 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Efficiency | 94 % |
| Output Voltage | 5V |
| Output Type | Adjustable |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5V |
| Voltage - Input (Min) | 1V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 1.5A Switch |
| Max Output Voltage | 5V |
| Voltage - Output (Min/Fixed) | 1.5V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1.2MHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.5V |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1421DMR2G Overview
A Cut Tape (CT) package is used in this voltage regulator to optimize performance. This harley voltage regulator has 8 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package available for this voltage regulator, as DC DC switching regulator is space-saving. In this case, DC DC switching regulator has 1 outputs configured to it. The adjusting voltage regulator generates Adjustable output. This voltage regulator 12v fits the Surface Mount mounting. The operating temperature should be kept at -40°C~85°C TA when the voltage regulator 12v is in operation. This DC-DC switching regulator has a switching frequency of 1.2MHz. A dc to dc voltage regulator's minimum input voltage of 1V is required for this voltage regulator to operate. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.5V. Featuring a maximum design flexibility of 1.5A Switch, dc to dc voltage regulator has a maximum output current of 1.5A Switch. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. An input voltage of 3.3V is required for switching regulator operation. There is a subcategory called Switching Regulator or Controllers that includes this voltage regulator. This DC/DC regulator belongs to the NCP1421 family. A voltage of 5V volts can be produced by voltage regulator. In order to operate voltage regulator, there are 8 pins that must be connected. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 1.5V. Voltage regulator's maximal output current reaches 600mA A to meet the operation requirements. With a maximum output voltage of 5V, DC DC switching regulator has a very high efficiency. DC-DC switching regulator with supply voltage 5V.
NCP1421DMR2G Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 5V
NCP1421DMR2G Applications
There are a lot of ON Semiconductor NCP1421DMR2G Voltage Regulators applications.
- Hydraulic presses
- Sensitive electronic devices
- Linear guide
- Electric water heaters
- Computer application technology
- Industrial controllers
- Grinders
- Alternators
- Network technology
- Communication system
