NCP1450ASN19T1G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1450A |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 1.9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 0.9V~6V |
| Control Features | Enable |
| Topology | Boost |
| Min Input Voltage | 600mV |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 180kHz |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 216kHz |
| Max Duty Cycle | 90 % |
| Duty Cycle (Max) | 80% |
| Height | 1mm |
| Length | 3.1mm |
| Width | 1.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1450ASN19T1G Overview
As a result of SOT-23-5 Thin, TSOT-23-5 compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 0.9V~6V. Worked in an dc switcher with a -40°C~85°C TA rating. With this switching controller, you can switch at 180kHz. The Surface Mount allows it to be used for dc dc regulator in general. Enable provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. Various 5 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. Searching "NCP1450A" will return other relevant dc to dc converter ics. There are 5 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 1.9V voltage. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. Voltage regulator dc to dc is designed to operate at 90 % duty cycle during power-ups and power-downs to ensure reliability. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulators have a maximum frequency of 216kHz. The maximum input voltage of the dc switcher is 5.5V, so users need to limit the voltage accordingly. Switching controller is necessary to have a supply voltage of 600mV.
NCP1450ASN19T1G Features
Transistor Driver Outputs
Switching Frequency: 180kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
NCP1450ASN19T1G Applications
There are a lot of ON Semiconductor NCP1450ASN19T1G DC to DC converter applications.
- Game consoles
- Hydro power
- Medical equipment
- Packaging
- Printing
- Alternators
- SMT equipment
- Linear guide
- Product burn-in
- Program control systems
