NCP1450ASN27T1G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1450A |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 2.7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 0.9V~6V |
| Control Features | Enable |
| Topology | Boost |
| Min Input Voltage | 600mV |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 180kHz |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 216kHz |
| Max Duty Cycle | 90 % |
| Duty Cycle (Max) | 80% |
| Height | 1mm |
| Length | 3.1mm |
| Width | 1.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1450ASN27T1G Overview
With a SOT-23-5 Thin, TSOT-23-5 package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tape & Reel (TR) is used to package the PMIC. The program can handle Transistor Driver dc switching's outputs (s). DC control operates at 0.9V~6V volts and has 0.9V~6V supply voltage. Work well in dc switchers with a -40°C~85°C TA. Switching can be done at 180kHz with this switching controller. dc dc regulator can be generalized using Surface Mount. For efficient switching control, the dcdc regulator features Enable. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 5. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. Searching "NCP1450A" will return other relevant dc to dc converter ics. There are a total of 5 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. According to the test statistics, DC regulator outputs 2.7V voltage. The dc dc regulator's usual output current is 1A, which should be noted down when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 90 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulators have a maximum frequency of 216kHz. The maximum input voltage of the dc switcher is 5.5V, so users need to limit the voltage accordingly. A voltage of 600mV is required for the supply.
NCP1450ASN27T1G Features
Transistor Driver Outputs
Switching Frequency: 180kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
NCP1450ASN27T1G Applications
There are a lot of ON Semiconductor NCP1450ASN27T1G DC to DC converter applications.
- Imported equipment
- Game consoles
- Product burn-in
- Linear guide
- Computer application technology
- Wide-range voltage regulation circuits
- Window air conditioners
- Network technology
- Lathes
- Various CNC machine tools
