NCP1450ASN30T1G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 180kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1450A |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 3V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 0.9V~6V |
| Control Features | Enable |
| Topology | Boost |
| Min Input Voltage | 600mV |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 90 % |
| Duty Cycle (Max) | 80% |
| Height | 1mm |
| Length | 3.1mm |
| Width | 1.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1450ASN30T1G Overview
It comes in the SOT-23-5 Thin, TSOT-23-5 package, which makes switching controller suitable for most applications. For 1 outputs, the dc motor controller is appropriate. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). A 0.9V~6V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a -40°C~85°C TA. As it has a Surface Mount value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Enable. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 5 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. NCP1450A can be searched for other relevant dc to dc converter ics. Switching converter has a total of 5 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. Statistically, the DC regulator outputs 3V voltage. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. The maximum duty cycle of this voltage regulator dc to dc is set to 90 % to ensure reliability during power-up and power-down. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. Switching controllers operate at 180kHz frequencies. The maximum input voltage of this dc switcher is 5.5V, so users must limit the voltage accordingly. Voltage 600mV is needed for the supply.
NCP1450ASN30T1G Features
Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
Frequency: 180kHz
NCP1450ASN30T1G Applications
There are a lot of ON Semiconductor NCP1450ASN30T1G DC to DC converter applications.
- Electrical power transmission
- Series voltage regulation circuits
- Servo drive system
- Various precision measuring instruments
- Thermal power
- Window air conditioners
- Digital display device
- Electric heating, lighting
- Radio equipment
- Electrical distribution systems
