NCP1450ASN33T1G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1450A |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 0.9V~6V |
| Control Features | Enable |
| Topology | Boost |
| Min Input Voltage | 600mV |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 180kHz |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 216kHz |
| Max Duty Cycle | 90 % |
| Duty Cycle (Max) | 80% |
| Height | 1mm |
| Length | 3.1mm |
| Width | 1.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1450ASN33T1G Overview
With its SOT-23-5 Thin, TSOT-23-5 package, the switching controller fits the needs of most applications. It is sufficient to generate 1 outputs with this dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. A 0.9V~6V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a -40°C~85°C TA. In this switching controller, the switch can be set to 180kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Enable. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at DUAL . Various 5 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 5V is input. Search for "NCP1450A" to find other relevant dc to dc converter ics. In total, switching converter has 5 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. According to the test statistics, DC regulator outputs 3.3V voltage. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 90 % during power-up and power-down. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. 216kHz is the maximum frequency of this dc regulators. The maximum input voltage of dc switcher is 5.5V, so users should limit their voltage accordingly. The supply voltage must be 600mV.
NCP1450ASN33T1G Features
Transistor Driver Outputs
Switching Frequency: 180kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
NCP1450ASN33T1G Applications
There are a lot of ON Semiconductor NCP1450ASN33T1G DC to DC converter applications.
- Correction machines
- Product burn-in
- Smart grid
- Computer monitoring equipment of building
- Direct power supply system
- Telecommunications equipment
- Access control systems
- Textile machinery
- Energy management systems
- Computed tomography (CT)
