NCP1450ASN50T1G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Rated DC | 60V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Current Rating | 4A |
| Frequency | 180kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1450A |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Max Output Current | 1A |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 0.9V~6V |
| Control Features | Enable |
| Max Output Voltage | 5.125V |
| Topology | Boost |
| Min Input Voltage | 600mV |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 4.875V |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 80% |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1450ASN50T1G Overview
In the SOT-23-5 Thin, TSOT-23-5 package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Tape & Reel (TR) is used to package the PMIC. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 0.9V~6V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Enable. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . A variety of dc switching's functions can be performed on 5 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 5V. Other relevant dc to dc converter ics can be found by searching "NCP1450A". The switching converter has a total of 5 pins. There is a particular type of Switching Regulator or Controllers in switching converter. According to the test statistics, DC regulator outputs 5V voltage. If you start a project, note down the dc dc regulator's usual output current of 1A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. 180kHz is the frequency of the switching controller. The maximum input voltage of this dc switcher is 5.5V, so users must limit the voltage accordingly. There must be a 600mV supply voltage. Input current cannot exceed 1A with this dc switcher. At its maximum output, the switching converter can provide 5.125V volts. 4.875V voltage output is lower than 4.875V.
NCP1450ASN50T1G Features
Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
Frequency: 180kHz
NCP1450ASN50T1G Applications
There are a lot of ON Semiconductor NCP1450ASN50T1G DC to DC converter applications.
- Various precision measuring detectors
- Refrigerators of central air conditioners
- Flexible manufacturing cells
- Handheld GPS
- Laboratories
- Analog precision reference circuits
- Network technology
- Printing equipment
- Game consoles
- Production lines
