NCP1550SN18T1
| Parameters | |
|---|---|
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Terminal Pitch | 0.95mm |
| Frequency | 600kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1550 |
| JESD-30 Code | R-PDSO-G5 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.45V~5.5V |
| Control Features | Enable |
| Input Voltage (Min) | 2.45V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Length | 3mm |
NCP1550SN18T1 Overview
Capsuled in the SOT-23-5 Thin, TSOT-23-5 package, the switching controller suits most application needs. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. 2.45V~5.5V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~85°C TA dc switcher. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Enable. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 5 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. You can find other relevant dc to dc converter ics by searching "NCP1550". Switching converter type is specifically Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 2.45V. Based on the test statistics, DC regulator outputs voltage 1.8V. The dc to dc regulator is limited to 5.5V input voltage. A frequency of 600kHz is used by the switching controller. DC to DC voltage regulator has a value of PFM CONTROL TECHNIQUE IS ALSO POSSIBLE to better satisfy the need.
NCP1550SN18T1 Features
Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
Frequency: 600kHz
PFM CONTROL TECHNIQUE IS ALSO POSSIBLE
NCP1550SN18T1 Applications
There are a lot of ON Semiconductor NCP1550SN18T1 DC to DC converter applications.
- Hydro power
- Automatic testing equipment
- Emergency lighting monitoring equipment
- Domestic water pumps
- Medical monitoring systems
- Electrical power transmission
- Die casting equipment
- Production lines
- Bending machines
- Sink circuits
