NCP1562ADBR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1562 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 23.2V~100V |
| Control Features | Current Limit, Frequency Control, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 246kHz~1MHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 26ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 85 % |
| Output Phases | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1562ADBR2G Overview
It comes in a 16-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 2 outputs. An enclosure of Tape & Reel (TR) is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). 23.2V~100V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. It can switch at 246kHz~1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Current Limit, Frequency Control, Ramp, Soft Start for efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. The 16 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 48V. You can find other relevant dc to dc converter ics by searching "NCP1562". 16 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. A 20V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 1A. The duty cycle of the voltage regulator dc to dc can be set to 85 % on power-up or power-down to ensure reliability. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. DC regulator's maximum frequency is 1MHz.
NCP1562ADBR2G Features
Transistor Driver Outputs
Switching Frequency: 246kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
NCP1562ADBR2G Applications
There are a lot of ON Semiconductor NCP1562ADBR2G DC to DC converter applications.
- Industrial controllers
- Telecommunications equipment
- Special machining machine tools
- Photovoltaic power
- Automatic plug-in machines
- Overvoltage protection circuits in TV sets
- Low output voltage switching power supply circuits
- Household control circuits
- Window air conditioners
- Computer monitoring equipment of building
