NCP1562ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Manufacturer Package Identifier | CASE 751B--05 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1562 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Power Dissipation | 950mW |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | 23.2V~100V |
| Control Features | Current Limit, Frequency Control, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 246kHz~1MHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 26ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 48V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 85 % |
| Output Phases | 1 |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1562ADR2G Overview
As a result of 16-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 2. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) are supported. 23.2V~100V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~125°C TJ dc switcher. It can switch at 246kHz~1MHz. The Surface Mount allows it to be used for dc dc regulator in general. To provide efficient switching control, Current Limit, Frequency Control, Ramp, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 48V. Search for "NCP1562" to find other relevant dc to dc converter ics. There are only 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. The test statistics indicate that DC regulator outputs a voltage of 20V. You should note that the dc dc regulator's usual output current is 2.5A. voltage regulator dc to dcs with a 85 % duty cycle are designed to be reliable when powered on and powered off. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at 1MHz Hz. It is possible to set the input voltage to 48V for nominal working status.
NCP1562ADR2G Features
Transistor Driver Outputs
Switching Frequency: 246kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 1MHz
NCP1562ADR2G Applications
There are a lot of ON Semiconductor NCP1562ADR2G DC to DC converter applications.
- Smart grid
- Elevator lighting
- Lathes
- Printing
- Servo drive system
- Photovoltaic power
- Digital video recorders
- Linear guide
- Power supplies of electronic gadgets
- Gear/thread machining machines
