NCP1562BDBR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1562 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 23.2V~100V |
| Control Features | Current Limit, Frequency Control, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 246kHz~1MHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 26ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 85 % |
| Output Phases | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1562BDBR2G Overview
The switching controller fits in the 16-TSSOP (0.173, 4.40mm Width) package and is ideal for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's23.2V~100V is the supply voltage and the operating voltage of the dc control. Worked in a -40°C~125°C TJ dc switcher before. Using this switching controller, it is possible to switch at 246kHz~1MHz. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Current Limit, Frequency Control, Ramp, Soft Start which allows efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . Different dc switching's functions can be applied to 16 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. 48V nominal DC switcher's voltage input. Search for "NCP1562" to find other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. DC regulator outputs 20V voltage according to the test statistics. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. The maximum duty cycle of this voltage regulator dc to dc is set to 85 % to ensure reliability during power-up and power-down. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThe max frequency of the pmic can reach 1MHz.
NCP1562BDBR2G Features
Transistor Driver Outputs
Switching Frequency: 246kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
NCP1562BDBR2G Applications
There are a lot of ON Semiconductor NCP1562BDBR2G DC to DC converter applications.
- Energy management systems
- Computer application technology
- Computer rooms
- Series voltage regulation circuits
- Handheld GPS
- Milling machines
- Access control systems
- Scientific research
- Network technology
- Alternators
