NCP1575DR2
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Frequency | 200kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1575 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 7.5V~20V |
| Quiescent Current | 9mA |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Buck |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Frequency - Switching | 280kHz |
| Input Voltage (Max) | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 80 % |
| Clock Sync | No |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1575DR2 Overview
As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 1. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 7.5V~20V volts and has 7.5V~20V supply voltage. Worked in a 0°C~125°C TJ dc switcher before. With this switching controller, you can switch at 280kHz. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . An array of 8 terminations of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. Search for "NCP1575" to find other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Switching converter type is specifically Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 9V. According to the test statistics, DC regulator outputs 10V voltage. Voltages 20V are the maximum that the dc to dc regulator will accept. The maximum duty cycle of this voltage regulator dc to dc is set to 80 % to ensure reliability during power-up and power-down. The switching controller works at a frequency of 200kHz. In dormant mode, 9mA is used.
NCP1575DR2 Features
Transistor Driver Outputs
Switching Frequency: 280kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 200kHz
NCP1575DR2 Applications
There are a lot of ON Semiconductor NCP1575DR2 DC to DC converter applications.
- Alternators
- Industrial controllers
- Household control circuits
- Ball screw pair
- Hydro power
- Solar power plants
- Program control systems
- CNC system
- Servo drive system
- Communication system
