NCP1575DR2G
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1575 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 980mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 7.5V~20V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Buck |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Frequency - Switching | 280kHz |
| Input Voltage (Max) | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 320kHz |
| Max Duty Cycle | 80 % |
| Clock Sync | No |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | OBSOLETE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
NCP1575DR2G Overview
With its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For 1 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). A 7.5V~20V voltage is supplied to the dc control and used for operating it. Suitable for work in a 0°C~125°C TJ dc switcher. There is a switch at 280kHz that can be used with this controller. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Frequency Control is included in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. 8 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. Other relevant dc to dc converter ics will be returned if you search "NCP1575". 8 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 9V. DC regulator outputs 980mV voltage based on test statistics. Voltages 20V are the maximum that the dc to dc regulator will accept. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 80 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. There is a maximum frequency of 320kHz on this dc regulators. To run the voltage regulator dc to dc safely and reliably, users should apply 12V to the voltage regulator dc to dc.
NCP1575DR2G Features
Transistor Driver Outputs
Switching Frequency: 280kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
NCP1575DR2G Applications
There are a lot of ON Semiconductor NCP1575DR2G DC to DC converter applications.
- Fire elevators
- USB circuits
- Surge protection circuits
- Product burn-in
- Combined machine tools
- Analog precision reference circuits
- Drilling machines
- Serial communication converter
- Overvoltage protection circuits in TV sets
- Television equipment
