NCP1579DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Frequency | 275kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Adjustable |
| Max Output Current | 120μA |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 12V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 1A |
| Max Output Voltage | 5V |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 13.2V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 800mV |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 80 % |
| Switching Frequency | 317kHz |
| Duty Cycle | 80 % |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1579DR2G Overview
This switching controller fits most application requirements since it is packaged in a SOIC package. There is enough capacity in the dc motor controller to generate the output for the 1 input. The pmic is packaged in Tape & Reel (TR) solid enclosure. Adjustable dc switching's outputs (s) are supported. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at DUAL . An array of 8 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. There are 8 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 80 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. A frequency of 275kHz is used by the switching controller. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 12V. Keep dc regulator at a temperature of 0°C or above. The temperature should not exceed 70°C degrees Celsius. A total of 1 functions are present in the switch converters. It is designed to have voltage regulators switchings with 8 pins. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 13.2V. Voltage 4.5V is necessary for the supply. Output current will not exceed 120μA. The switching converter can output 5V volts at its utmost, according to the datasheet. At its lowest voltage, the voltage controller does not produce less than 800mV. When it comes to maximum supply voltage, switching voltage regulators is rated 13.2V. At 317kHz, this controller performs best.
NCP1579DR2G Features
Adjustable Outputs
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 275kHz
Switching Frequency: 317kHz
NCP1579DR2G Applications
There are a lot of ON Semiconductor NCP1579DR2G DC to DC converter applications.
- Product burn-in
- Program control systems
- Surface processing equipment
- Household control circuits
- Automation technology
- Precision electronic equipment
- Hydro power
- Flaw detection equipment
- Geothermal power
- Drilling machines
