NCP1581DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | NCP1581 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Output Configuration | Positive |
| Output Current | 100μA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~20V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 7V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 400kHz |
| Input Voltage (Max) | 20V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 430kHz |
| Max Duty Cycle | 95 % |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1581DR2G Overview
With a 14-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs can be generated with the dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. 6.3V~20V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a 0°C~125°C TJ. Using this switching controller, it is possible to switch at 400kHz. dc dc regulator is made easier with Surface Mount. Enable, Soft Start provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Thare switching converters has a terminal (s) at DUAL . 14 terminations with a variety of function. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. Other relevant dc to dc converter ics can be found by searching "NCP1581". Switching converter has a total of 14 pins. Input voltage of dc dc voltage regulator must be 7V. It should be fully noted that the dc to dc regulator only accepts 20V input voltage at most. If you start a project, note down the dc dc regulator's usual output current of 100μA. It is set to 95 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulators have a maximum frequency of 430kHz. 15mA volts is the supply current. This the controllers dc has a nominal current supply of 15mA.
NCP1581DR2G Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
NCP1581DR2G Applications
There are a lot of ON Semiconductor NCP1581DR2G DC to DC converter applications.
- Access control systems
- Industrial controllers
- Current source circuits
- Elevator lighting
- Scientific research
- Flaw detection equipment
- Terrestrial set-top boxes
- Direct power supply system
- Wind power
- Computer-related products
