NCP1587EDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | NCP1587 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 13.2V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 8mA |
| Output Configuration | Positive |
| Output Current | 120μA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~13.2V |
| Control Features | Enable, Phase Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 275kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 310kHz |
| Max Duty Cycle | 80 % |
| Isolation | Non-Isolated |
| Duty Cycle (Max) | 75% |
| Clock Sync | No |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
NCP1587EDR2G Overview
As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 4.5V~13.2V. A -40°C~125°C TJ dc switcher is not a problem. The switching controller can be switched at 275kHz. The Surface Mount allows it to be used for dc dc regulator in general. For efficient switching control, the dcdc regulator features Enable, Phase Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Various 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Search for "NCP1587" to find other relevant dc to dc converter ics. In total, switching converter has 8 pins. This dc dc voltage regulator should be powered by a voltage of 4.5V. normally, the dc dc regulator's output current is 120μA, which you should keep in mind when starting a project. Voltage regulator dc to dc is designed to operate at 80 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator's maximum frequency is 310kHz. To operate the voltage regulator dc to dc safely and reliably, users should apply 13.2V. A supply current of 8mA is used to power it.
NCP1587EDR2G Features
Transistor Driver Outputs
Switching Frequency: 275kHz
Enable, Phase Control
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
NCP1587EDR2G Applications
There are a lot of ON Semiconductor NCP1587EDR2G DC to DC converter applications.
- Smoke exhaust equipment
- Motor controller circuits
- Program control systems
- Post equipment
- Arc suppression circuits
- Scientific testing
- Balance equipment
- Telecommunications equipment
- Computer-related products
- Shearing machines
