NCP1589DMNTWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Additional Feature | OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Pitch | 0.5mm |
| Base Part Number | NCP1589 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.5mA |
| Nominal Supply Current | 2.5mA |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~13.2V |
| Control Features | Enable, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 500kHz |
| Max Duty Cycle | 80 % |
| Duty Cycle (Max) | 83% |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1589DMNTWG Overview
With its 10-VFDFN Exposed Pad package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. There is a Tape & Reel (TR) solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). 4.5V~13.2V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a 0°C~95°C TA rating. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Enable, Power Good. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of terminations with 10 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis set to 5V. A search for "NCP1589" will reveal other relevant dc to dc converter ics. Total pins of switching converter are 10. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. Based on the test statistics, DC regulator outputs voltage 400mV. It's important to remember that the dc dc regulator's normaloutput current is 1.5A, so you should note it down when starting a new project. It is set to 80 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulators have a maximum frequency of 500kHz. This value is OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5V so that DC to DC voltage regulator better serves the purpose. When running the voltage regulator dc to dc in a circuit, users should apply 12V to ensure safety and reliability. There is 2.5mA supply current for it. There is a nominal current supply of 2.5mA for this the controllers dc.
NCP1589DMNTWG Features
Transistor Driver Outputs
Enable, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5V
NCP1589DMNTWG Applications
There are a lot of ON Semiconductor NCP1589DMNTWG DC to DC converter applications.
- Product testing
- Industrial robots
- Printing
- Digital video recorders
- Laboratories
- Digital display device
- Grinders
- Communication system
- Scientific testing
- Servo drive system
