NCP1589LMNTWG
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | 4.5V~13.2V |
| Control Features | Enable, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 500kHz |
| Max Duty Cycle | 83 % |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Additional Feature | OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Pitch | 0.5mm |
| Base Part Number | NCP1589 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.5mA |
| Nominal Supply Current | 2.5mA |
| Output Configuration | Positive |
| Output Current | 1.5A |
NCP1589LMNTWG Overview
It comes in a 10-VFDFN Exposed Pad package, so switching controller can be used for most applications. dc motor controller is suitable for 1 output generation. Tape & Reel (TR) solid enclosure protects the pmic. The program can handle Transistor Driver dc switching's outputs (s). A 4.5V~13.2V voltage is supplied to the dc control and used for operating it. Suitable for work in a 0°C~95°C TA dc switcher. The Surface Mount makes it ideal for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Power Good. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . An array of 10 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. You can find other relevant dc to dc converter ics by searching "NCP1589". 10 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. As determined by the test statistics, the output voltage of DC regulator is 400mV. You should note down the dc dc regulator's usual output current of 1.5A when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 83 % during power-up and power-down. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator has a maximum frequency of 500kHz. For better satisfaction, the value of DC to DC voltage regulator is OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5V. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 12V. It runs on a supply current of 2.5mA. There is a nominal current supply of 2.5mA for this the controllers dc.
NCP1589LMNTWG Features
Transistor Driver Outputs
Enable, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 83 %
OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5V
NCP1589LMNTWG Applications
There are a lot of ON Semiconductor NCP1589LMNTWG DC to DC converter applications.
- Telecommunications equipment
- Power supplies of electronic gadgets
- Game consoles
- Computer application technology
- Milling machines
- Printing
- Household control circuits
- Product burn-in
- Electric water heaters
- Serial communication converter
