NCP1595AMNTWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1595 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 800mV |
| Output Type | Adjustable |
| Voltage - Input (Min) | 4V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 1.5A |
| Max Output Voltage | 4.68V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 800mV |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1595AMNTWG Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. As you can see, this harley voltage regulator contains 6 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. In order to save space, this harley voltage regulator is available in the 6-VDFN Exposed Pad package. The voltage regulator 12v has 1 outputs. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. The voltage regulator 12v fits the Surface Mount mounting hole. As long as its operating temperature is -40°C~125°C TA, dc to dc voltage regulator should perform well. A DC-DC switching regulator of this type operates at a switching frequency of 1MHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 4V. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.8V. This voltage regulator 12v offers maximum design flexibility with an output current of 1.5A. 5.5V volts is DC DC switching regulator's maximum input voltage. The peak reflow temperature of this regulator amounts to NOT SPECIFIED to be essentially indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 5V. This voltage regulator is included in the Switching Regulator or Controllers subcategory. NCP1595 is a family of voltage regulators that belong to the DC/DC industry. Voltage can be produced at 800mV volts by voltage regulator. There are 6 pins that are used for the operation of the voltage regulator 12v. Ideally this switch regulator should have an output voltage of about 800mV at the very least. With a maximum output voltage of 4.68V, DC DC switching regulator has a very high efficiency.
NCP1595AMNTWG Features
1 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
6 pins
NCP1595AMNTWG Applications
There are a lot of ON Semiconductor NCP1595AMNTWG Voltage Regulators applications.
- Adjustable voltage or current linear circuits
- Magnetohydrodynamic power
- Precision electronic equipment
- Scientific research
- Telecommunications equipment
- Laboratories
- ATMs
- Industrial controllers
- Experimental setup
- Wind power
