NCP1601BP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 9.6V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Frequency | 405kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1601 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 9V |
| Output Current-Max | 0.75A |
| Frequency - Switching | 58kHz |
| Supply Current-Max (Isup) | 5mA |
| Switcher Configuration | BOOST |
| Mode | Critical Conduction (CRM), Discontinuous (Transition) |
| Current - Startup | 17μA |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1601BP Overview
It comes in a 8-DIP (0.300, 7.62mm) package.A Tube-packaging method was used to package it.Depending on the device, the mounting type will either be Through Hole or C.With a voltage supply of 9.6V~18V, it should work.Currently, the device is set to operate at -40°C~125°C o'clock.Other IC types, such as POWER FACTOR CONTROLLER, are present in the part.The gadget comes with several 8 terminals.Currently, the startup current is 17μA.A component's pin number remains 8.I think the best thing about this device is that there is a number of NCP1601 in it.The switching frequency is 58kHz.The 8 pins are summed up.Depending on the input voltage, it can operate at a minimum of 9V volts.As a kind of subclass of Switching Regulator or Controllers, it can be seen as a kind of subclass of Switching Regulator or Controllers.A frequency of 405kHz allows it to continue operating with a good level of accuracy.Located on mount Through Hole, it forms part of the mountain range.A maximum of 0.75A output current is provided by itIt is always necessary to power the component with a 15V volt supply in order for it to operate.If isup is greater than 5mA, then the supply current is too high.A 1 output can take many forms, depending on the application.
NCP1601BP Features
NCP1601BP Applications
There are a lot of ON Semiconductor NCP1601BP PFC PMICs applications.
- Vibration sensor
- Low-voltage microprocessor power supplies
- Engine management
- Aging system
- DVD and CD-ROM drive
- Motorcycle
- Laboratory
- Measurement and control euipment
- SMPS (Switching-Mode Power Supply)
- Desktop microcomputer systems
