NCP1603D100R2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ALSO OPERATES IN PEAK CURRENT MODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 9V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1603 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 13V |
| Power Supplies | 1315V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Input Voltage (Min) | 9V |
| Output Current-Max | 1A |
| Frequency - Switching | 58kHz |
| Input Voltage (Max) | 18V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Mode | Critical Conduction (CRM), Discontinuous Conduction (DCM) |
| Current - Startup | 17μA |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1603D100R2G Overview
Currently, it is available as a 16-SOIC (0.154, 3.90mm Width) package.It is packaged in a Tape & Reel (TR) way.There is a Surface Mount mounting type on the device.It should operate with the voltage supply of 9V~18V.Device -40°C~125°C operates at -40°C~125°C.The part has other IC types such as POWER FACTOR CONTROLLER WITH POST REGULATOR.The gadget comes with several 16 terminals.17μA represents the startup current.There is no change to the pin number of the component.I think the best thing about this device is that there is a number of NCP1603 in it.Switching occurs at a frequency of 58kHz.The 16 pins are summed up.Depending on the input voltage, it can operate at a minimum of 9V volts.It's a subclass of Switching Regulator or Controllers in a way.It has a maximum input voltage (Max) of 18V.There is a mountain named Mount Surface Mount that consists of it.As far as output current is concerned, it works in 1ASupply 1315V is the device's supply.It should also be noted that there are other features, for example, ALSO OPERATES IN PEAK CURRENT MODE.
NCP1603D100R2G Features
NCP1603D100R2G Applications
There are a lot of ON Semiconductor NCP1603D100R2G PFC PMICs applications.
- TVS diodes
- ADAS (Advanced Driver-Assistance System)
- Motor controllers
- Set top boxes
- Game machines
- Pressure sensor
- Telematics
- Production line
- Transmissioin control
- Communication device
