NCP1615D2DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width), 15 Leads |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 15 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 9.5V~28V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Frequency | 26kHz |
| Base Part Number | NCP1615 |
| JESD-30 Code | R-PDSO-G15 |
| Input Voltage-Nom | 15V |
| Power Supplies | 15V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Operating Supply Current | 2mA |
| Input Voltage (Min) | 9.5V |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 3.5mA |
| Switcher Configuration | BOOST |
| Mode | Current Controlled Frequency Foldback (CCFF), Critical Conduction (CRM) |
| Current - Startup | 12mA |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1615D2DR2G Overview
In a 16-SOIC (0.154, 3.90mm Width), 15 Leads package, it is available.The package is Tape & Reel (TR)-shaped.There is a Surface Mount mounting type for the device.It should be powered by 9.5V~28V's voltage supply.Device -40°C~125°C is set to operate.As well as the POWER FACTOR CONTROLLER integrated circuit, this part contains other types of integrated circuits as well.The gadget comes with several 15 terminals.There is a current of 12mA at startup.Pin number 16 remains the same for the component.Best part of the device has a NCP1615 in it.If the input voltage of the device is as low as 9.5V, it can function properly.I suppose it can be considered a subclass of Switching Regulator or Controllers.28V is its input voltage (Max).With a frequency of 26kHz, it can continue to operate accurately.It is a part of mount Surface Mount.As a rule of thumb, the component is always powered by a 15V volt supply.The maximum supply current, Isup, shall not exceed 3.5mA, which is the maximum voltage.A device that uses 15V as a supply has the following characteristics.In this case, the supply current of the gadget is set to 2mA.
NCP1615D2DR2G Features
NCP1615D2DR2G Applications
There are a lot of ON Semiconductor NCP1615D2DR2G PFC PMICs applications.
- CPU power supply
- SMPS (Switching-Mode Power Supply)
- Set top boxes
- Smartcard
- ADAS (Advanced Driver-Assistance System)
- Motorcycle
- Post DC-DC regulation
- EPS (Electric Power Steering)
- Solar inverters
- Hot swap controller
