NCP1654BD200R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 450mW |
| Voltage - Supply | 9V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Frequency | 200kHz |
| Base Part Number | NCP1654 |
| Pin Count | 8 |
| Input Voltage-Nom | 15V |
| Power Supplies | 15V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 9.75V |
| Frequency - Switching | 180kHz~220kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Switcher Configuration | BOOST |
| Mode | Continuous Conduction (CCM) |
| Current - Startup | 75μA |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1654BD200R2G Overview
There is a 8-SOIC (0.154, 3.90mm Width) package that comes with it.It is packaged in a Tape & Reel (TR) way.Surface Mount is the mounting type of the device.With a voltage supply of 9V~20V, it should work.Currently, the device is set to operate at a frequency of -40°C~125°C.In addition to POWER FACTOR CONTROLLER, the part has other types of ICs.The gadget has several 8 terminals.Current startup is 75μA.Pin number 8 remains the same for the component.Best part of the device has a NCP1654 in it.There is a frequency 180kHz~220kHz associated with switching.8 pins make up its sum.With a minimum input voltage of 9.75V, it is capable of functioning.As a kind of subclass of Switching Regulator or Controllers, it can be seen as a kind of subclass of Switching Regulator or Controllers.With a frequency of 200kHz, it can continue to operate with good accuracy.Located on Mount Surface Mount, it is a part of the mountain range.Power for the component is always provided by a 15V volt supply.Isup, the maximum supply current, shall not exceed 6mA.A device that uses 15V as a supply has the following characteristics.
NCP1654BD200R2G Features
NCP1654BD200R2G Applications
There are a lot of ON Semiconductor NCP1654BD200R2G PFC PMICs applications.
- Sense & Conrol
- Op-amps
- Car infotainment
- Medical Applications: Diagnostics and Imaging
- Temperature monitoring
- Bypass circuit
- Smartcard
- Analog datalogger
- Camera
- Timing and clock ICs
