NCP1800DM41R2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1800 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Voltage | 4.1V |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 20mA |
| Input Voltage (Min) | 2.5V |
| Supply Current-Max (Isup) | 0.25mA |
| Switcher Configuration | SINGLE |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1A |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1800DM41R2 Overview
In the Tape & Reel (TR) package, you will find it.The package that is included with it comes in the shape of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).There is a mounting type Surface Mount specified for the device.The temperature should be set to -20°C~85°C TA to ensure reliable performance.The functionality of this device is provided by an analog IC called BATTERY CHARGE CONTROLLER.To charge the device, there is a requirement for Constant - Programmable current.This device's related parts can be found under the base part number NCP1800.It has a total of 8 terminations.In total, it has 8 pins.In addition to Current, a variety of programmable features are available.The device has a maximum charging current of 1A.The 4.1V output voltage allows for high efficiency.In order to operate, it must have a current of 20mA at the output.The device you are looking at belongs to the subcategory of Power Management Circuits.It is mounted in the way of Surface Mount.In most cases, the maximum supply voltage (Vsup) is set to 0.25mA.There is 6V voltage input on the device.It is recommended to set the supply voltage to 16V in order to maximize the efficiency of the system.Voltages below 2.5V volts are minimal.
NCP1800DM41R2 Features
Power Management Circuits subcategory
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NCP1800DM41R2 Applications
There are a lot of ON Semiconductor NCP1800DM41R2 Battery Chargers ICs applications.
- Marine buoy lights
- Electricity bank
- Smart cameras
- Electrical Utility industry
- GPS tracker
- Electric pallet truck
- Home appliances
- Automotive electronics
- Floor scrubber
- Remote powered communication and telemetry systems
