NCP1937A1DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LSOP (0.154, 3.90mm Width), 17 Leads |
| Number of Pins | 17 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 17 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 9V~30V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1mm |
| Pin Count | 17 |
| Input Voltage-Nom | 12V |
| Power Supplies | 12V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Input Voltage (Max) | 30V |
| Halogen Free | Halogen Free |
| Control Technique | RESONANT CONTROL |
| Supply Current-Max (Isup) | 5.2mA |
| Mode | Critical Conduction (CRM) |
| Switching Frequency | 70kHz |
| Current - Startup | 20mA |
| Height Seated (Max) | 1.7mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1937A1DR2G Overview
There is a 20-LSOP (0.154, 3.90mm Width), 17 Leads package that comes with it.The package is Tape & Reel (TR)-shaped.There is a Surface Mount mounting type on the device.The voltage supply of 9V~30V should be used to operate it.The device is set to operate at -40°C~125°C.In addition to POWER FACTOR CONTROLLER, the part has other types of ICs.Several 17 terminals are present on the gadget.It is currently set to 20mA at startup.The component's pin number remains 17.In this case, it has a sum of 17 pins.There is a minimum input voltage of 9V that can make it function properly.It's a subclass of Switching Regulator or Controllers in a way.30V is its input voltage (Max).Mount Surface Mount includes it.There is always a 12V-volt supply powering the component.Isup, the maximum supply current, shall not be more than 5.2mA.Supply 12V is the device's supply.
NCP1937A1DR2G Features
NCP1937A1DR2G Applications
There are a lot of ON Semiconductor NCP1937A1DR2G PFC PMICs applications.
- Workstations
- Laboratory
- Portable medical devices
- Disk drivers
- SoC
- Decoupling circuit
- Camera
- Smart manufacturing
- FPGA power
- Automotive applications
