NCP2811ADTBR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | NOCAP™ |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.7V~5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Terminal Pitch | 0.65mm |
| Base Part Number | NCP2811 |
| Pin Count | 14 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Operating Supply Voltage | 3V |
| Supply Voltage-Max (Vsup) | 5V |
| Number of Channels | 2 |
| Nominal Supply Current | 6mA |
| Output Power | 27mW |
| Halogen Free | Halogen Free |
| Bandwidth | 20 kHz |
| Voltage Gain | 3.52dB |
| Power Supply Rejection Ratio (PSRR) | 106dB |
| Max Output Power | 110mW |
| Max Output Power x Channels @ Load | 110mW x 2 @ 16 Ω |
| Load Impedance | 16Ohm |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP2811ADTBR2G Overview
14-TSSOP (0.173, 4.40mm Width) contains an embedded device.The device is in the form of Tape & Reel (TR) .In addition, 14 terminations are used, which entail the termination of a transmission line with a device whose characteristic impedance matches the line's.In the configuration, Headphones, 2-Channel (Stereo) is used as the output.An electrical device of type Class AB is involved.14 pins are pronged contacts on a computer or other communication device that form a signal interface.A part of this electronic device is mounted in the way of Surface Mount .There is 2.7V~5V supply voltage for this electrical device.2 channels are present on the device.Operation can be ensured by Depop, Short-Circuit and Thermal Protection, Shutdown .Temperatures should not exceed -40°C~85°C TA .The device contains 14 pins.Amp parts is part of Audio/Video Amplifiers .This chip is included in the NCP2811 family.This electronic part has a maximum output power of 110mW kWh per hour.Vsup reaches 5V at the maximum.Amp parts belongs to the series NOCAP? .
NCP2811ADTBR2G Features
14-TSSOP (0.173, 4.40mm Width) package
14 pin count
NCP2811 family
110mW kWh per hour
NOCAP? series
NCP2811ADTBR2G Applications
There are a lot of ON Semiconductor NCP2811ADTBR2G audio amplifiers applications.
- Test and measurement instruments
- Test equipment
- High/low-pass filter circuit
- Instrumentation
- Power control
- Video conversion and routing
- Radar
- Power generator
- Displayers for aircraft and air transportation control systems
- Medical instruments
