NCP300HSN18T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP300 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Power Supplies | 3.8V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 480nA |
| Max Supply Current | 1.3μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 1.8V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 1.764V |
| Max Reset Threshold Voltage | 1.836V |
| Threshold Voltage | +1.8V |
| Undervoltage Threshold | 1.764V |
| Overvoltage Threshold | 1.836V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP300HSN18T1G Overview
There are 5 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of SOT-23-5 Thin, TSOT-23-5 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 1.5V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 5 pins in it. Pin count of the power management is 5. IC management can only work with a supply voltage of 800mV volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. Mounting type Surface Mount is recommended. We recommend setting the supervisors to -40°C~125°C TA degrees. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supply current of the power management is 500nA. A similar IC managements number of the manufacturer can always be found by using NCP300, the base power ics number. To be able to work, this power management requires 3.8V volts of power. A maximum supply temperature of 1.3μA can be used with this power management.
NCP300HSN18T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP300HSN18T1G Applications
There are a lot of ON Semiconductor NCP300HSN18T1G Voltage Supervisors applications.
- Battery-powered equipment
- Consumer electronics
- Power distribution systems of CCU
- Functional modules
- Smart meter
- Utility meter
- Efficient information transmission
- DC stabilized power supply module
- DSP
- Household appliances
