NCP300HSN27T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP300 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 500nA |
| Max Supply Current | 1.3μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.7V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.646V |
| Max Reset Threshold Voltage | 2.754V |
| Threshold Voltage | +2.7V |
| Undervoltage Threshold | 2.646V |
| Overvoltage Threshold | 2.754V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP300HSN27T1G Overview
This power management consists of 5 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. To assist you, this IC power includes 1 functions. Power management consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes SOT-23-5 Thin, TSOT-23-5 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. In a 1.5V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. This power management has 5 pins. IC management can only work with a supply voltage of 800mV volts. The supply voltage (Vsup) should not exceed 10V volts in this IC power. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The power management's supply current is 500nA. For similar manage ics search of the manufacturer, you can always refer to NCP300, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.3μA.
NCP300HSN27T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP300HSN27T1G Applications
There are a lot of ON Semiconductor NCP300HSN27T1G Voltage Supervisors applications.
- Microprocessor system
- Power communication system
- Cloud computing
- Battery-powered equipment
- Utility meter
- Insulation fault location system
- Radio
- Refrigeration
- Military communications
- Analog circuit
