NCP300HSN30T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Additional Feature | DETECTION THRESHOLD VOLTAGE IS 3.0V |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP300 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 500nA |
| Max Supply Current | 1.3μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 3V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.94V |
| Max Reset Threshold Voltage | 3.06V |
| Threshold Voltage | +3V |
| Undervoltage Threshold | 2.94V |
| Overvoltage Threshold | 3.06V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP300HSN30T1G Overview
A total of 5 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SOT-23-5 Thin, TSOT-23-5 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1.5V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 5 pins on IC management. Power managment ic pin count is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. The supply voltage (Vsup) should not exceed 10V volts in this IC power. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The power management's supply current is 500nA. Among other features, IC power can be also taken advantage of [0], for instance. A similar IC managements number of the manufacturer can always be found by using NCP300, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 1.3μA.
NCP300HSN30T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP300HSN30T1G Applications
There are a lot of ON Semiconductor NCP300HSN30T1G Voltage Supervisors applications.
- Smart meter
- Magnetic resonance imaging
- Linux and server computing
- Multi-voltage system
- Household appliances
- Important electronics for automotive protection
- Radio
- Leakage protection
- Important electronics for automotive safety
- Military communications
