NCP300HSN45T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP300 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 520nA |
| Max Supply Current | 1.4μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.5V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 4.41V |
| Max Reset Threshold Voltage | 4.59V |
| Threshold Voltage | +4.5V |
| Undervoltage Threshold | 4.41V |
| Overvoltage Threshold | 4.59V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP300HSN45T1G Overview
It is mounted through 5 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a SOT-23-5 Thin, TSOT-23-5 package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. During operation, the power ic is supplied with a voltage of 1.5V. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 5. 5 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. There should be no more than 10V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a supply current of 500nA for the power management. You can always use NCP300, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 1.4μA can be used with this power management.
NCP300HSN45T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP300HSN45T1G Applications
There are a lot of ON Semiconductor NCP300HSN45T1G Voltage Supervisors applications.
- Important electronics for automotive safety
- Household appliances
- FPGA design
- Telecommunications equipment
- Refrigeration
- Consumer electronics
- Electrical fire monitoring system
- Unattended substation automation
- DVR
- Power distribution systems of operating room
