NCP300LSN25T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Base Part Number | NCP300 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Output Current | 70mA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.5V |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.45V |
| Max Reset Threshold Voltage | 2.55V |
| Threshold Voltage | +2.5V |
| Undervoltage Threshold | 2.45V |
| Overvoltage Threshold | 2.55V |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 125°C |
| Height | 1.1mm |
| Length | 3mm |
| Width | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP300LSN25T1G Overview
This power management consists of 5 mounting terminals on which it can be mounted. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. There are 1 channels available on this supervisor, and each channel has a different function. There are SOT-23-5 Thin, TSOT-23-5 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. When a supply voltage of 1.5V is applied to the power ic, it conducts. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. A total of 5 pins are located on this power management. 5 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 500nA. To find similar IC managements from the manufacturer, you can always search by NCP300. 1 outputs are available for this IC management's architecture.
NCP300LSN25T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP300LSN25T1G Applications
There are a lot of ON Semiconductor NCP300LSN25T1G Voltage Supervisors applications.
- Electronics installed in the vehicle
- Microcontroller system
- Low voltage/high power - AI, GPU
- Electric heating appliances
- External alarm
- DSP
- Set top box
- Sensitive sensors
- Medical-specific isolation transformer
- Network equipment
