NCP300LSN27T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP300 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 500nA |
| Max Supply Current | 1.3μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.7V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.646V |
| Max Reset Threshold Voltage | 2.754V |
| Threshold Voltage | +2.7V |
| Undervoltage Threshold | 2.646V |
| Overvoltage Threshold | 2.754V |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP300LSN27T1G Overview
As you can see, this power management is mounted through 5 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are SOT-23-5 Thin, TSOT-23-5 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 1.5V supply voltage, the power management conducts. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 5 pins that are attached to IC management. There are 5 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 500nA is the recommended value. You can always use NCP300, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature voltage supervisor can handle is 1.3μA.
NCP300LSN27T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP300LSN27T1G Applications
There are a lot of ON Semiconductor NCP300LSN27T1G Voltage Supervisors applications.
- Microcontroller system
- Data storage applications
- Magnetic resonance imaging
- Fire equipment power monitoring system
- Network equipment
- Leakage current detection
- Stable power system
- Medical-specific insulation monitor
- Unattended substation automation
- Computer applications
