NCP300LSN46T1G
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP300 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 520nA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.6V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 4.508V |
| Max Reset Threshold Voltage | 4.692V |
| Threshold Voltage | +4.6V |
| Undervoltage Threshold | 4.508V |
| Overvoltage Threshold | 4.692V |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
NCP300LSN46T1G Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of SOT-23-5 Thin, TSOT-23-5 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1.5V. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. In total, it has 5 pins on IC management. This power management has 5 pins. A voltage (Vsup) that doesn't fall below 800mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The power management's supply current is 500nA. A similar IC managements number of the manufacturer can always be found by using NCP300, the base power ics number.
NCP300LSN46T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP300LSN46T1G Applications
There are a lot of ON Semiconductor NCP300LSN46T1G Voltage Supervisors applications.
- Cloud computing
- Low voltage/high power - AI, GPU
- Smartphones
- Stable power system
- Sensitive sensors
- emergency room
- Dash board
- Functional modules
- Automotive permanent magnet synchronous motors
- Military electronics
