NCP300LSN47T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP300 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 530nA |
| Max Supply Current | 1.4μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.7V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 4.606V |
| Max Reset Threshold Voltage | 4.794V |
| Threshold Voltage | +4.7V |
| Undervoltage Threshold | 4.606V |
| Overvoltage Threshold | 4.794V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP300LSN47T1G Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes SOT-23-5 Thin, TSOT-23-5 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 1.5V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by a Surface Mount-axis. The power management belongs to the Power Management Circuits subcategory. 5 pins are present in total in this power management. 5 pins are present on the power management system. Supply voltage (Vsup) should be at least 800mV for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~125°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 500nA. A similar IC managements number of the manufacturer can always be found by using NCP300, the base power ics number. The maximum supply temperature that PMIC chip can work with is 1.4μA.
NCP300LSN47T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP300LSN47T1G Applications
There are a lot of ON Semiconductor NCP300LSN47T1G Voltage Supervisors applications.
- Detection of phase sequence
- Rechargeable batteries
- Urban rail transit weak current power monitoring
- Power distribution systems of CCU
- Analog circuit
- Utility meter
- External alarm
- Household appliances
- Smart meter
- Power distribution systems of ICU
